|
Chapter 1: Getting Started with Pro-E
- Lesson 1.1 : Introduction to Pro-Engineer
- Lesson 1.2 : What is Pro-Engineer?
- Lesson 1.3 : Modules in Pro-E
- Lesson 1.4 : Opening Pro-E for first time
Chapter 2: Sketch
- Lesson 2.1 : Line
- Lesson 2.2 : Rectangle
- Lesson 2.3 : Circle
- Lesson 2.4 : Text
- Lesson 2.5 : Trim
- Lesson 2.6 : Import a sketch
- Lesson 2.7 : Mirror and scale
- Lesson 2.8 : Constraint-1
- Lesson 2.9 : Constraint-2
- Lesson 2.10 : Constraint-3
Chapter 3: Part-I
- Lesson 3.1 : Create a new file
- Lesson 3.2 : Save a file
- Lesson 3.3 : Extrude as solid
- Lesson 3.4 : Extrude as surface
- Lesson 3.5 : Extrude as thicken
- Lesson 3.6 : Extrude cut
- Lesson 3.7 : Revolve as solid
- Lesson 3.8 : Revolve as surface
- Lesson 3.9 : Revolve as thicken
- Lesson 3.10 : Revolve cut
- Lesson 3.11 : Sweep protrusion-1
- Lesson 3.12 : Sweep protrusion-2
- Lesson 3.13 : Sweep thin protrusion
- Lesson 3.14 : Sweep cut
- Lesson 3.15: Sweep thin cut
- Lesson 3.16 : Sweep surface trim
- Lesson 3.17 : Sweep thin surface trim
- Lesson 3.18 : Blend with parallel
- Lesson 3.19 : Blend with rotational
- Lesson 3.20 : Blend with general
Chapter 4: Part-II
- Lesson 4.1 : Helical sweep to create spring
- Lesson 4.2 : Helical sweep cut to create threads
- Lesson 4.3 : Helical sweep to create shock absorber spring
- Lesson 4.4 : Hole-1
- Lesson 4.5 : Hole-2
- Lesson 4.6 : Hole-3
- Lesson 4.7 : Rib
- Lesson 4.8 : Round-1
- Lesson 4.9 : Round-2
- Lesson 4.10 : Chamfer-1
- Lesson 4.11 : Chamfer-2
- Lesson 4.12 : Dimension pattern
- Lesson 4.13 : Direction pattern
- Lesson 4.14 : Axis pattern
- Lesson 4.15 : Fill pattern
- Lesson 4.16 : Table pattern
- Lesson 4.17 : Family table
Chapter 5: Part-III
- Lesson 5.1 : Color and appearance
- Lesson 5.2 : Mirror
- Lesson 5.3 : Fill
- Lesson 5.4 : Copy
- Lesson 5.5 : Paste special
- Lesson 5.6 : Intersect
- Lesson 5.7 : Merge
- Lesson 5.8 : Project
- Lesson 5.9 : Wrap
- Lesson 5.10 : Extend
- Lesson 5.11 : Offset-1
- Lesson 5.12 : Offset-2
- Lesson 5.13 : Offset-3
- Lesson 5.14 : Offset-4
- Lesson 5.15 : Thicken
- Lesson 5.16 : Solidify
Chapter 6: Assembly
- Lesson 6.1 : Pro-Assembly
- Lesson 6.2 : Assembly constraint-1(default)
- Lesson 6.3 : Assembly constraint-2(fix)
- Lesson 6.4 : Assembly constraint-3(mate, align)
- Lesson 6.5 : Assembly constraint-4(insert)
- Lesson 6.6 : Assembly constraint-5(co-ordinate system)
- Lesson 6.7 : Assembly constraint-6(tangent)
- Lesson 6.8 : Assembly constraint-7(point on surface, edge on surface...)
- Lesson 6.9 : Creating exploded view
- Lesson 6.10 : Creating x-sectional view
Chapter 7: Drawing
- Lesson 7.1 : Pro-drawing
- Lesson 7.2 : Creating a sheet
- Lesson 7.3 : General view
- Lesson 7.4 : Drawing view properties-1
- Lesson 7.5 : Drawing view properties-2
- Lesson 7.6 : Drawing view properties-3
- Lesson 7.7 : Drawing view properties-4
- Lesson 7.8 : Detail view
- Lesson 7.9 : Creating bill of material-1
- Lesson 7.10 : Creating bill of material-2
- Lesson 7.11 : Creating dimension
|